Why Get The Best Wood Lathe?

What is a wood lathe? It is wood turning device that lends a shape to a project. This tool spins the wood and sculpts it in a way that a hand held tool like a sandwich or even a grinder lacks. In a way, a wood machine can provide you more control over your wooden…

What is a wood lathe? It is wood turning device that lends a shape to a project. This tool spins the wood and sculpts it in a way that a hand held tool like a sandwich or even a grinder lacks. In a way, a wood machine can provide you more control over your wooden project and helps you shape it the way you perceived it to be. In fact, the best wood lathe can offer you with many options of carving wood into a balance.

Benefits of the best wood lathe
There are two main reasons why people invest in a wood lathe and they are related to productivity. That is correct a standard wood machine can make anything possible and you can have:

  • Better productivity in regards to your woodwork
  • It gives you the consistency of a thorough work
  • You can make anything with it starting from toothpick, bowls, candle stick holder, to baseball bats; it is like sky is the limit
  • The precision that you can reach is something that no chisel can provide you with
  • You can adjust chiseling according to your projects
  • It gives a fine finish, provided you know what tool works best for that and this means you should utilize a parting tool

Safety is a must

Generally speaking, you must follow a procedure that makes sure you keep things safe. How can you do this? Do not worry, you do not have another course for this, but you can make small adjustments to defend yourself, when working with the best wood lathe. Here are a few steps that you can develop to up the situation:

  • Get into the habit of inspecting the machine on a regular basis before you start your work
  • Make sure that the settings and fittings are all secured
  • The most important thing is to keep the work station and area clean, you need to insure that it is
  • Another aspect that is considered to play a significant part to maintain safety, is the quality of the wood to be used
  • Keep the tools sharp, so that they cut through smoothly
  • Please make sure that the area is lighted well and this should not neglect at all as you need to see clearly while working with a wood lathe
  • Avoid wearing loose fitted clothes and jewelry like chains are best kept at a bay as they can easily entangled with your wood turning machine

Right gear
Just for your information, we would request all our readers to practice safety while working woodworking tools in general. Working with the best wood lathe is no exception. Make sure that you wear all protective gear and most importantly keep your eyes protected.

In addition to this, keep pets and children off your work station while working or even at rest. This routine will keep your family and pet safe forever because no one likes to play around with the safety of their family. This will ensure safety for all and turn your woodwork into an enjoyable experience. Hope to have a good job with wood lathe.

Electric Tools or Air Tools, Which One Is Best?

In doing a comparison we are speaking of the corded electric tool, not the cordless. It is in a class of its own. The electric tool is heavier, runs hotter and is normally more expensive than its air tool counter part. It is naturally heavier because of the electric motor and is also the reason…

In doing a comparison we are speaking of the corded electric tool, not the cordless. It is in a class of its own. The electric tool is heavier, runs hotter and is normally more expensive than its air tool counter part. It is naturally heavier because of the electric motor and is also the reason it gets hotter. Running an electric tool, even in an air conditioned shop, can get uncomfortable on the hands after a period of time. After using one for several hours, the additional weight and heat can put a strain on the body. The tool itself is generally more expensive than the air tool and is something to consider if you have budgeted yourself.

Advantages of the electric tool are the fact that they are more portable. You can plug it in the shop, in the garage, outside on the law or yard. Where ever there is an accessible electric outlet you can use your electric tool. You can take it next door to help your neighbor on a job or to mom's house for a repair. You are not limited to the fact that there is not a compressor available which would be the case with air tools.

Air tools or pneumatic tools are much lighter because they do not have the electric motor and therefore are much cooler to operate. They also have whatever power you need at your fingertips. With the proper compressor the power of the air tool can not be matched with an electric tool. There are repair kits available so that you can repair an air tool. Normally if an electric tool goes bad you just have to replace it.

The drawbacks of an air tool are first and foremost the fact that you have to have an air compressor. The initial output for a compressor can be quite expensive. They have to be used in one area where your air hose can reach or you have to lug your compressor from one place to another. This is not practical if you have a large stationary compressor in the garage or shop. Even the smaller pancake versions of compressors can weigh up from 50 to 100 pounds. Fittings and air hoses can leak causing the compressor to run more often. There is to be a special fitting to collect moisture from the air or drain the tank after each use. Air tools have to be oiled generally after each use to keep them operating properly and not freeze up.

Considering the advantages and disadvantages of both the air tool and the electric tool, it would be unfair to say which one is the best. If a homeowner only needs a drill to hang a picture on the wall or do a small repair around the house, then the electric drill would be the best for him to use. If he has a shop or a garage that he works out of and does a lot of repair on his car then the air tool would be his best choice. Before anyone can say which one is best you would have to take into consideration what is being done and where.

Corded and Cordless Tools, Which One Should You Buy?

Probably the largest advantage of a cordless tool, regardless of type, is its portability. They can go anywhere you go, whether it be the shop, your garage or your yard, without having to find a place to plug it in or be being limited to where you can go by the length of the cord.…

Probably the largest advantage of a cordless tool, regardless of type, is its portability. They can go anywhere you go, whether it be the shop, your garage or your yard, without having to find a place to plug it in or be being limited to where you can go by the length of the cord. Most of the cordless tools purchased today come with a two battery power pack. When one is low on power just simply replace it with the fully charged one. They are also very compact and can be stored out of the way easily. When you buy them they come in kits so you can usually get a drill, a circular saw, possibly a pin nailer and a flash light, so you really have multiple tools in one.

Lets compare some different tool uses where one might be better than the other. On power drills, if you are drilling a lot of holes in cement that has been aged, the corded hammer drill would be your best choice. Even though there are cordless hammer drills on the market, you would need the continuous power of a corded drill to get the job done in a reasonable length of time.

If you are using a circular saw, it would depend on what you are cutting as to the choice you should make. If you are crossing cutting or ripping a 2 x 6 or 2 x 8 and doing a lot of them, then the power of a corded saw would be helpful. On any other type of cutting, either one would do the job well. The same thing would hold true with the reciprocating saw. It would depend on how big of a job you are doing.

Some disadvantages of the cordless tool are the loss of power if you are using it for a long length of time. The cordless tools are heavier and the additional 5 to 8 pounds of weight can put a strain on the body after using it for hours.

A disadvantage of the corded tool is the cord itself. It seems like it is always in the way. You can trip over them or cut them with a saw. These are both safety hazards. Also as mentioned earlier, you are limited to as far as your cord will reach. You have to find a longer extension cord or find another place to plug it in.

The information in this article is strictly the opinion of the writer. It is not meant to infer which tool is best for you. Hopefully this will give you some insight on things you have to consider when buying a corded or cordless tool. I am a home owner and a do it yourself type of person. I have a workshop and have used tools of different types for a long time. To solve the problem for me as to which one I should buy, I have both the corded and cordless tool. Now I just grab which ever one is best suited for the job at hand. If I could only buy or own just one it would be the cordless tool. For the average home owner that would be sufficient for most jobs he would encounter. Again, this is just my opinion.

Circular Saw Vs Table Saw – Pros and Cons

Each type of saw has its pros and cons. The decision to go with either of the two should be arrived at after a comprehensive review of them for so much will depend on how one will use the tool. So when comparing a circular saw vs a table saw, there is not really a…

Each type of saw has its pros and cons. The decision to go with either of the two should be arrived at after a comprehensive review of them for so much will depend on how one will use the tool. So when comparing a circular saw vs a table saw, there is not really a right or wrong, it comes down to convenience, speed, power and budget as to which is chosen.

The circular saw which from here on out will be referred to as “Skil-saw”, is a power saw that uses a toothed blade or abrasive disc to cut different materials. In the woodworking world, Skil-saw is used to refer to a hand-held electric circular saw designed for cutting wood but with a change in blade, it can be used for cutting other materials. The key advantage of the Skil-saw is its much lighter weight and portability. Some have a built in laser guide to help you make precision cuts. They also come cordless with a lithium-ion battery which makes them even more portable. The major set back for cordless is that it may take hours to get a full charge before using it.

The table saw consist of a circular saw blade mounted to an arbor and driven by an electric motor. The blade protrudes through the surface of a table which provides the needed support for the material being cut. They are usually found in any woodworking shop because usually nothing happens without them. Modern designs are now lightweight and can be place on a table or any other supporting surface. Due to its light weight, it can be lifted and transported to different job locations without too much difficulty.The biggest advantage of the table saw is its ability to cut multiple square pieces and angle cuts to the same exact length and angle with precision each time by simply adjusting the miter fence. I am not saying it can not be done with a Skil-saw but it is much more difficult and requires experience.

So the decision to use one saw or the other comes down to which one a person is more comfortable with. That does not make them wrong. As was mentioned earlier there is not a right or wrong one to use. The case could be stated that one is
better to use in certain circumstances but that depends on the person using the saw. What the best saw for me to use may not work for you in a given circumstance. Before you start a project, review what has to be done and choose the saw that
best suits you for the cuts you have to make in terms of speed, accuracy, safety and convenience.

What to Look for When Buying Socket Sets

A high-quality assortment of ratchets, sockets and accessories is essential for many different jobs, from the complex to the light maintenance work. They come in several different sizes with wrench heads to match the individualized bolts. Here is a few of the most important things to consider when buying socket sets: Socket sizes The different…

A high-quality assortment of ratchets, sockets and accessories is essential for many different jobs, from the complex to the light maintenance work. They come in several different sizes with wrench heads to match the individualized bolts. Here is a few of the most important things to consider when buying socket sets:

Socket sizes

The different socket sizes are likely to include SAE, metric and Whitworth. The SAE (standard-sized socket) has its measurements in inches, which is practical for those mechanics working on older vehicle models. The metric tools are necessary for working on the latest domestic and import vehicles with the sizes in millimeters.

A garage should be stocked to match the type of vehicles serviced. However, a combination of SAE and metric is the most practical option to make sure a tool is available for the most wide-ranging jobs.

The third type is the Whitworth sockets which are only likely to feature on the British vehicles like a classic Jaguar or MG.

Drive size

The SAE and metric sockets are available in a range of sizes, including–inch, 3/8-inch and–inch. The range of sizes is intended to work with the different ratchets and may even require an extension unit to work. For those that are limited to buying a single drive size, it is best to go with the 3/8-inch drive because this has the ability to work with the most sockets.

The–inch drive sockets are the preferred choice for reaching bolts or nuts in tight spaces, while the large,–inch drive socket is practical for the larger fasteners and have the ability to accept more torque. This type of socket may need a breaker bar or ratchet to fully tighten or loosen.

Points

The shape of the sockets can range from a 12-pointed star to a six-pointed hexagon. The six-point socket is the more reliable option because its walls are more able to sit flush to the sides of the nuts. They are more practical for applications that need serious torque or more on large hardware. But, the 12-point socket is the most convenient to use because it is a lot easier to get in position and line up, and a useful option for lighter work.

Alloy steel

The strength and durability of the sockets can vary significantly. One of the most durable choices is alloy steel which is heat forged with several other materials. It is essential to have a reliable material that has the ability to provide long-term service and stands up to the most difficult jobs.

Rotary Tools: Cordless Vs Battery

Rotary tools are a practical choice for small projects like cutting in tight spaces, engraving, carving, and grout removal. They are great for the small-scale application because of the efficient power and convenient size. The rotary tools are either cordless of electric models. This tool is quite similar to the oscillating multi-tools, but has a…

Rotary tools are a practical choice for small projects like cutting in tight spaces, engraving, carving, and grout removal. They are great for the small-scale application because of the efficient power and convenient size. The rotary tools are either cordless of electric models. This tool is quite similar to the oscillating multi-tools, but has a fixed spinning motion. Also, it operates at a high-speed, so the cutting action is not always the smoothest.

Here is an overview of the different types of rotary tools:

Cordless

The cordless rotary tools are the most portable and give greater freedom in use. They can operate anywhere on a job-site provided the battery pack is charged. It is great to quickly finish jobs that are out of reach of a convenient power source. However, the run-time of the cordless unit is limited. It is only possible to work while the battery holds enough charge go give full power and performance. A typical full charge is in the region of 60 to 90 minutes, and a complete charge takes about 3 hours. Also, the cordless unit will be slightly heavier because it has to accept the extra weight of the lithium battery.

Electric

The electric rotary tools completely remove the concern of running out of power at an awkward moment. With a suitable power source in place, this tool can run as long as needed. The power cord is usually in the region of 6-feet so this gives a decent amount of freedom to move around. They are a practical choice for the lengthier or heavy-duty projects because of the ability to rely on constant power. Also, with no battery in place, the overall weight of the tool is lighter. This lowers the risk of fatigue for the user. A negative of this type of tool is having limited access. Projects can only be completed within the length of the power cord. An extension cord can help widen the workable area, but this is not always a convenient option.

Before you buy

There are several factors to consider when buying the rotary tools. A major point is the type of work to complete. The professional in need of a reliable tool for day-to-day jobs will need something more powerful than want a hobbyist needs. The electric unit is preferred for those that demand constant power. A portable one is not practical for the long or heavy-duty jobs because the battery will need to be consistently recharged. But, for those working on a light home project, the cordless unit can fit the needs.

A Lightning Rod Offers Invaluable Protection for a Home During Storms

Thunderstorms strikes are a scary experience. Around the nation, there are hundreds of stories of objects or people being hit by a bolt of lighting, especially during the summer. According to research from the National Weather Service, there is an average of 47 reported fatalities per year and hundreds of accounts of people being severely…

Thunderstorms strikes are a scary experience. Around the nation, there are hundreds of stories of objects or people being hit by a bolt of lighting, especially during the summer. According to research from the National Weather Service, there is an average of 47 reported fatalities per year and hundreds of accounts of people being severely injured.

Additionally, according to National Geographic, cloud-to-ground bolts strike the Earth's surface nearly 100 times every single second. And each bolt can bring with it up to one billion volts of electricity. While seeking shelter indoors offers greatly increased safety, these powerful bolts can also strike property, cars, and more.

There is usually cost damage done to inanimate objects that get hit by bolts. Despite the common myth, lightning can and often does strike the same place twice, especially tall and isolated buildings. Depending on the damage to things like buildings and cars, the cost of repair can be thousands of dollars. Additionally, with buildings, the large electrical currents from the bolt can cause dangerous fires.

So how can homeowners and business owners avoid some of this damage? Scientists agree that an easy preventive method to avoid damage is to install a lighting rod.

Why Use a Lightning Rod?

The lighting rod, also known as a finial, acts as a tool to negate the positive power of a bolt, according to Richard Orville, a professor of atmospheric sciences at Texas A & M who has studied lighting for more than 35 years. In an interview with Texas A & M Today, Orville says that the key is to place the rod at the highest point of a structure. The rod is then connected to a series of conductors and electrodes that provide a specific path for the electric current to travel and become safely grounded.

Many new residential construction sites, especially in more prone areas, include some form of finial as a preventive measure. All tall buildings, which are very attractive to bolts, include finials. The National Weather Center notes that the Empire State Building in New York City, for example, has been stuck thousands of times since it was finished in 1931. But there was never an issue because it was built with rods.

Choosing to spend money to install a finial is a tough decision that each property owner has to consider. Homeowners should determine if their home insurance plan includes lighting protection. In areas of frequent thunderstorms, such as Tornado Alley across the Midwest and areas of Florida, it can be an especially worthwhile investment. While lighting strikes are rarer for smaller structures like homes, it offers an added element of safety and peace of mind.

Choosing the Right Tool for the Right Job

You would not try to split a 10 inch diameter log with a hatchet instead of an ax. By the same token you would not want to try to drill a 3/4 inch hole in cement with a standard 1/4 drill. You hear people all the time bad mouthing a particular tool because it did…

You would not try to split a 10 inch diameter log with a hatchet instead of an ax. By the same token you would not want to try to drill a 3/4 inch hole in cement with a standard 1/4 drill. You hear people all the time bad mouthing a particular tool because it did not work well when the real problem was the user. They did not choose the right tool for the job at hand. Most tools, if not all, were made for a specific range of jobs to perform. When you try to use it beyond the range it was made and designed for, you start having problems. Then it is human nature to blame the tool or the manufacturer when the fault really lies with the person using it.

There is always exceptions in tool usage as well as in all other walks of life. For example, I have a 1/4 inch standard electric drill that I have owned for twenty plus years. I have used it for everything from drilling a one inch hole in cement and metal to driving a # twelve four inch screw into hard wood and it still works fine. It was and still is an exceptional tool. With the beating I gave it, it should have failed long ago but it is one of the exceptions we come across in life. There is no answer for it.

All manufacturers of tools will have specifications on their tools such as amperage, RPM, size, weight, capacity and etc., etc. They are there for a purpose, to help us choose the tool we need. In a lot of cases price is the determining factor when we buy and not what the item was designed for. When we do not read the specs to determine if the tool is the proper one and buy because it is cheaper, we are setting it up to fail.Then we blame the manufacturer for such a bad tool.

Sometimes a little overkill is not a bad thing. When it comes to using tools, even though the one maker will do the job, a stronger one is better for it will not put stress on the tool. How long a tool will last is dependent upon how much stress it is put under on a daily basis. Sometimes bigger is better. The bigger, stronger and more powerful the tool that is used will sometimes make the job easier and not put as much stress on the tool, therefore making it last longer. You could probably pull a loaded fourteen foot trailer with a 1/2 ton pick-up truck without any problem but a tandem wheel 1-1 / 2 ton truck would be better. The same scenario holds true with construction tools. So the next time you plan a project, take into consideration the proper tool to use and everything will work out better in the end.

How to Select the Best Air Compressor for Use

Buying an air compressor requires careful thought and consideration. An ideal compressor requires focusing on many performance factors. An Air Compressor Buying Guide is the starting point before you make this decision. This article discusses the factors you need to consider before making your last choice. Check the needed Standard Cubic Feet per Meter output…

Buying an air compressor requires careful thought and consideration. An ideal compressor requires focusing on many performance factors. An Air Compressor Buying Guide is the starting point before you make this decision. This article discusses the factors you need to consider before making your last choice.

Check the needed Standard Cubic Feet per Meter output – SCFM

This is one of the most important factors. It is the Standard Cubic Feet per Meter output of a compressor. This is also the volumetric output of a compressor. It is typically higher than or almost equal to your consumption. A high output is achieved with a larger compressor.

Check the pressure capacity of your compressor

In order for the targeted flow rate to be achieved, pressure is needed. This pressure is normally given in pound per square inch. It changes according to the compressor size, brand and design. If it is needed for heavier applications, the pressure should be higher. With an increased pressure, even the flow rate or output is also increased. Most importantly, the flow rate has to match your targeted consumption.

Why do you need that compressor?

The usage of your compressor dictates the ratings you should be looking for. If you only need it for some domestic purposes, something smaller would be enough. However, if you have a number of air tools and other equipment to use the same source, then you need a bigger compressor. The rating of each tool is easy to check from the indicated values. Add up the capacities of all the tools and include a 30% allowance.

From where are you going to tap electric power?

Your source of power is critical because it even dictates the size of compressor you can use. If there is a constant supply of electricity, then a single stage reciprocating compressor can be a good choice. But if you are in an area that is consistently hit with power cuts, shut downs and load shedding, the reservoir type is your right choice. You can run it when there is power, and use it whenever there is need. It will keep the needed pressure for long hours depending on your usage.

How much space do you have for your compressor?

Before your compressor is installed, you need to arrange enough space for it. This means that if you have enough space, a bigger compressor would be ideal. But if there is no space to accommodate a larger compressor, buy a portable one. However, space considerations need to come only after you are satisfied with the performance. In some cases, you may even need to create space.

What are some common horse power ratings?

The horse power rating of a compressor needs to be considered just like the other factors. A variety of compressors may have their ratings ranging from 1.6 to 6 horsepower. However, this factor is normally controlled by the pressure and SCFM of the compressor. The power rating should not be a standard factor. It should meet the requirements for your usage.

Summary of requirements

In conclusion, your compressor should match the usage you are buying it for. Therefore, the best Air Compressor Buying Guide you need should answer your performance questions. Most manufacturers provide the needed details. With the best guidance, you will stand a chance of buying the best equipment to work for many years to come.

Tips on the Best Metal Lathe

How can you define a metal lathe? It may not be that simple to explain as to what it is, but we try to explain it as a machine that can shape or mold hard materials. They are also known as metalworking lathe or lathe in the machining world. These machines were designed to work…

How can you define a metal lathe? It may not be that simple to explain as to what it is, but we try to explain it as a machine that can shape or mold hard materials. They are also known as metalworking lathe or lathe in the machining world. These machines were designed to work with metals in the beginning, but with the advent of plastic, they now have a versatile use. In fact, the best metal lathe can carve propeller shafts, jewelry, steel, watch making and much more.

Functions of the best metal lathe
In simple words, a metal lathe can cut metals symmetrically and this provides them with a shape. It works efficiently to produce beautiful artifacts that you can sell or keep with yourself. Be it a professional lathe or a do it yourself one, it can conduct some basic functions like:
• It can rotate a metal to give lend it a precision
• It can cut through metals to make them equal
• Moreover, the easy processing and hard processing setup helps it to cut smoothly
• The sending operation allows it to give a finish to your project in no time at all

Benefits of using a metal lathe
There is no end to this discussion because if you are a DIYer, then you already know the importance of this kind of tool. If you are a big business house, then you must have your own arrangements to take care, but you may be looking for more.
• This tool gives you a consistency to work on your projects
• It is a big time saver
• It brings your efforts as well
• This means it adds to your productivity
• The kind of finishing it can lend to your projects can be astounding
• Yes, but you need to know how to use the machine properly

How to choose the best metal lathe?
If you are wondering about how to choose one from the haystack, then you should give this section a thorough reading. We have laid down simple steps to reach your ideal product:
• The first thing that you need to focus on is the functionality of a lathe and match it with your requirements
• Of course, the precise movements matter while selecting a metal lathe
• You must also check on the durability of a machine you are going to invest in
• The performance of the motor should be taken into consideration as rule of the thumb
• Make sure that the design is simple and not very complicated to work with
• Practicality matters in this case, so choose something at an affordable pricing and do not go for anything fancy

Times have changed and these days you can get a variety of lathe machines in the market. However, if you want to choose the best one out of them, then you have to adhere to the rule we have stated in this post. Finding the best metal lathe is no big deal, but getting it for a reasonable amount may be a deal breaker for some. Remember a metal lathe is a precision tool and it must be used with care.

Advantages and Disadvantages of the Lithium-Ion Battery

The lithium-ion battery is one of the most popular choices for consumer and portable electronics. The high performance and fast recharge cycle also makes a great choice for automobile, aerospace and military applications. Here are a few of the basic advantages of using the lithium-ion battery: Compact size The lithium-ion battery is smaller and lighter…

The lithium-ion battery is one of the most popular choices for consumer and portable electronics. The high performance and fast recharge cycle also makes a great choice for automobile, aerospace and military applications. Here are a few of the basic advantages of using the lithium-ion battery:

Compact size

The lithium-ion battery is smaller and lighter than most other types of rechargeable batteries in the market. The compact size makes is a popular choice for a wide range of electronic gadgets.

High-energy density

The high energy density of this type of battery makes it a very favorable choice compared to the alternatives. This means the battery has the ability to provide a lot of power without being large in size. The high energy is great for power-hungry gadgets like tablets, smartphones and laptops.

Low self-discharge

The lithium-ion battery has a low self-discharge rate, which is estimated at about 1.5% per month. The slow rate of discharge means the battery has a long shelf life and the potential to be recharged and used a lot more often than other options. For instance, the metal-nickel hydride battery has a much faster self-discharge rate of about 20% per month.

Fast charge cycle

The fast charge cycle is a further reason for its great popularity in day-to-day electronics like phones and tables. The charge time is rather a fraction of the alternative choices.

Long lifespan

The lithium-ion battery has the ability to complete hundreds of charge and discharge cycles. Over the battery's lifespan, it is likely to see a reduction in capacity. For instance, after a total of 1000 cycles there is the risk of losing up to 30% of its capacity. However, the loss of capacity varies with the type and quality of the battery. The most advanced lithium-ion battery is more likely to hold full capacity until about 5000 charge-discharge cycles are complete.

Are there any disadvantages

In addition to the wide-ranging advantages of the lithium-ion battery, there are also a few disadvantages to note. A common issue is likely to relate to the cost. This type of battery is nearly 40% more expensive than its closest alternatives. A reason for the higher cost is the need to combine the battery with on-board computer circuitry to help control issues with current and voltage. Also, heat can be an issue. Any battery left or used in a high temperature environment will find the performance and quality of battery degrades faster.

Experts Share Important Lawn Care Tools Homeowners Should Have

Lawn tools typically fall into 3 categories – basic tools, specialist tools and tools to rent. Basic Lawn Care Tools Garden Rake – This is a steel-headed rake that is very useful for preparing small areas for the planting of plugs, sprigs and seed. Wheelbarrow – This will haul everything from lawn tools to lawn…

Lawn tools typically fall into 3 categories – basic tools, specialist tools and tools to rent.

Basic Lawn Care Tools

Garden Rake – This is a steel-headed rake that is very useful for preparing small areas for the planting of plugs, sprigs and seed.

Wheelbarrow – This will haul everything from lawn tools to lawn waste to fertilizer.

Shovel – This is used primarily for large quantities of fine-textured material like soil, sand or non-fibrous mulches. Consider selecting by weight. It will be a lot easier for you to dig if you make use of a lighter shovel.

Spreader – Precision is the main difference between a rotary and drop spreaders. A drop spreader will distribute fertilizer, seed, and other amendments. Settings will let you control the amount distributed. A rotary spreader, on the other hand, will fling seed or amendments over a wide area. However, this should not be used for irregularly, small shaped lawns.

Edger – This is a half-moon-shaped cutting head that is mounted to a hardwood handle in order to keep the lawn edges neat. It can be used to cleanly separate a lawn from paved surface. It offers a more finished appearance as it trims away excess sold if you lay the sod along irregular lawn edges.

Specialty Tools

Blowers – This is powered either by gas or electric. Also, they can be wheeled, hand-held, or backpack styles. Although you can just rake leaves on the lawn, you will certainly appreciate the help of a blower to move leaves out from under the shrubs. Some recommend investing in electric blowers since they are queter and will not have emissions.

Power Edger – This is a tool with a short blade that will trim grass vertically to create borders or horizontally at lawn edges.

Saw – An electric saw is a great tool for cutting tree limbs and trunks. This can handle most chores. This is quiet, low maintenance, always read to go, and will not emit exhaust fumes.

Tools To Rent

Earthmover – This will include bulldozers, power shovels, excavators, backhoes and many more.

Power Aerator – This is available in different styles. It loosens compacted soil by drilling many small holes in it.

Vertical Mower – This is like a lawn mower that can be used for dethating and refining the soil in preparation for efficient seeds. This has different vertically mounted blades set in order penetrate the soil slightly.

Lawn Roller – You can use this tool to prepare the soil for planting. Although this is inexpensive, this will take up storage space.

There are indeed a couple of lawn care tools you must invest in to achieve a beautiful lawn .

Plasma Cutting

Plasma cutting is an invaluable tool for achieving fast, clean cuts in steel, aluminum, or stainless. This is achieved through the use of plasma cutters that combine a high-pressure air or gas flow with an electric arc. The heat can reach a temperature of up to 40,000 degrees Fahrenheit. Here are some things to keep…

Plasma cutting is an invaluable tool for achieving fast, clean cuts in steel, aluminum, or stainless. This is achieved through the use of plasma cutters that combine a high-pressure air or gas flow with an electric arc. The heat can reach a temperature of up to 40,000 degrees Fahrenheit. Here are some things to keep in mind when you're using a plasma cutter.

Safety First

Although plasma cutting is not as bright as welding, you should proceed as if it is. Be sure to wear flame retardant clothes and hair covering. Use glasses # 5 eye protection and work in a safe area. Be aware of your surroundings. Remember, the heat and light can be overwhelming, and you must ensure your safety.

Consumables

When you notice that your cuts are losing their sharpness, you may need to replace some or all of the parts that make up the cutting head. Typically, this can consist of a heat shield, contact tip, insulators, nozzle, and offset tool.

It's important that you check the availability of these consumables when you purchase your plasma cutter. Choose a current model with an easy process for ordering parts.

Moisture

Plasma cutters need clean, dry air to run efficiently. Moisture is the number one cause of parts losing efficiency and going bad. There are a couple things you can do to slow down the effects of moisture, and keep it to a bare minimum.

Allow 25 – 30 feet of line from the air compressor to the moisture trap. The moisture trap will work better if the air has a chance to cool first.

You can purchase an air drier that uses silica gel to draw moisture from the air. In fact, buy two, they are not expensive. These can be installed at the compressor and at the water trap to increase the life of your consumables. The air driers themselves will be easier and more cost effective to replace the plasma cutter parts.

Cutting Speed

You need to cut at the right speed. If you're new to plasma cutting, it may take you a few tries to get it dialed in properly. One of the best indicators is the direction of the sparks during the cut.

If you're cutting too quickly, the sparks will move towards you. You need to slow it down. The sparks and dross should fall towards the floor. If they do, you're moving at the right speed!

It's in the Angle

Typically, you are holding the plasma cutter at a 90-degree angle to the metal you are cutting. When you reach the end of a cut, shift the angle up slightly to ensure a smooth end of cut.

If you notice considering dross on the underside of your cut, you can knock it off. A small file does the job perfectly.

Happy Cutting!

Keeping these tips in mind will help you to have an efficient experience using your plasma cutter. I'm going advise you to invest in a good air compressor before you start. Remember to adjust your psi and amperating depending on the type and thickness of the materials you're cutting.

Common Drywall Supplies and What They Do

Whether you are new to the professional drywall scene or have a small DIY drywall project to complete, you will need to acquire the right tools and supplies to get the job done. But building your workshop with drywall tools is not enough. You must also understand what they do and how they work. As…

Whether you are new to the professional drywall scene or have a small DIY drywall project to complete, you will need to acquire the right tools and supplies to get the job done. But building your workshop with drywall tools is not enough. You must also understand what they do and how they work. As a novice professional in the industry, you get to learn this from your mentors at work over time; but as a homeowners with a DIY drywall repair, you will have to learn this information a bit sooner if you want to get the work done quickly.

Below you will find some of the most common drywall materials. Continue reading to learn about them, including what they are, what they do, and where to get them.

Drill

Drills come in several makes and models. You can choose between a cordless or corded drill. Both work well with drywall work. Many professionals prefer cordless for obvious reasons. Drills are used in the drywall industry for installation purposes. Installing gypsum board requires a power drill and screws.

Drywall Saw

Saws for drywall come in various shapes, sizes, and serrations. They are used to cut board to size, so the type you need will vary depending on the particular needs of your project. You can choose among double-sided saws, hand saws, fine-finish saws, hacksaws, and more.

Miter Box

A miter box is a terrific tool used to measure saw strokes and miter cuts. Not only do they provide smooth and even cutting motion, they provide safety for your hands and fingers.

Utility Knife

Utility knives are used for cutting, leveling, trimming, and scrapping drywall board. They come in multiple fashions and multiple blade sizes. They are usually made of stainless steel, so they are durable and long-lasting.

Joint Knife

Also called a taping knife, a joint knife is the tool used to scoop, scrape, spread, and smooth out drywall mud. It has a wide blade that comes in various sizes, from 4 inches to 14 inches.

Drywall Tape

Drywall tape is an important tool because it creates a physical bond between adjacent sheets of drywall. It is the surface to which the plaster sticks to. It provides a seamless surface for drywall installation and repairs and more.

Mud Pans

A mud pan is the flat plate, usually paper or metal, that holds spackle and mud. They come in all different shapes and sizes. Some can hold up to a a gallon of drywall mud.

Drywall Screws

These are special screws used to hold up gypsum board. They have extra course threads that stay secure in drywall. There are several kinds, all with different sizes and applications, including fine-head, self-drilling, pan-head, and more.

Joint Compound

This is a white powder containing gypsum board dust that is combined with water to produce a mud. This mud is then used to seal joints between drywall sheets. This is also called mud, spackle, or plaster. It is used to create the smooth, level 5 drywall finishes you see in quality constructed buildings and homes.

Cordless Finish Nailer: Helpful Buying Tips

A cordless finish nailer is more convenient and saves time over a pneumatic or corded nail nailer. Of the finish nails available, a 16-gauge cordless finish nailer appears to be the most popular finishing cordless nail gun. A cordless finish nailer is like a brad nailer in that it also uses high-gauge nails and can…

A cordless finish nailer is more convenient and saves time over a pneumatic or corded nail nailer. Of the finish nails available, a 16-gauge cordless finish nailer appears to be the most popular finishing cordless nail gun.

A cordless finish nailer is like a brad nailer in that it also uses high-gauge nails and can be commonly found in the toolkits of finish carpenters and cabinetry makers. The difference is in the size of the nails. Finish nailers use larger nails than brad nails.

If you regularly work on projects where you have to nail crown molding, baseboards, cabinets, chair rail molding, wood furniture, paneling, shelving, casing, window trim, door trim, hardwood floor, millwork, and larger decorative trim, a cordless model will get the job done faster and make your life on the job much easier.

Finish nails are generally longer and larger than brads, but still create a small enough hole that they can easily hide with putty and then painted after the nailing is finished.

What are some features to look for when considering a cordless finish nailer?

Size and Weight

Finishing work is typically an all-day job over multiple days. That means that you need to hold your electric nail gun in your hand for extended periods. A cordless model does not have a cord or pneumatic hose connected that you have to drag with you and manage. That reduces the stress on your wrists. Still, if the nailer itself is heavy, it will take a toll on you over time.

The battery on some models can add significant weight to the tool. The larger capacity the battery, the more it weighs and the larger it will be.

A finish cordless nailer needs to get into tight spaces and work at odd angles compared to other nails and so size is an important consideration. Angled models reduce the overall height of the tool and can make it easier to use in tight spaces.

Look for a smaller, angled cordless finish nailer with a lighter, modern technology battery that weighs the least amount possible to help keep work longer without as much fatigue.

Nail Firing Operating Modes

Finishing work sometimes lends itself to sequential, precise one-at-a-time nailing and sometimes you are not as concerned with precision as you are with speed. For those times, you want a nailer that does high-speed bump firing. A nailer with both modes is ideal.

Nail Depth

As important as accurately firing the finishing nail is the need to achieve the right nail depth. Some finish nailers come with an adjustable depth control that allows you to accidentally control depth. You should expect that any cordless finish nailer you buy will deliver consistent nail depth in a variety of wood types.

Lighting

As much as any tool, a finish nailer finds its way into dark spaces like cabinets or low-light areas like baseboards near the floor. A cordless model with LED lights can deliver shadowless light directly to the surface so that you can see what you're doing without needing additional lighting.

Jamming

No matter how careful you are, ever you will experience a nail jam. It's just the nature of the nails you work with. How you deal with the jam is important. If you need to go get a screwdriver or wrench in order to try and remove the jam, you're wasting time and money. Look for a model that features tool-less access like a swing-open nosepiece that allows you to quickly and easily remove the jam without a lot of downtime.

Warranty

A long warranty is an indication that the manufacturer has faith in their materials and workmanship. Look for the longest warranty available and if possible a money-back guarantee if you're not satisfied with the tool.

A quality cordless finish nailer saves time for trim carpenters, cabinetmakers, and others who routinely install baseboard, shoe, crown molding, chair rails, paneling, hardwood flooring, staircases, window casings, door casings, or door jams.

We sincerely hope that this article has provided you with valuable information that helps you choose the best cordless finish nailer for your needs!